EdgeCAM 10.0 for Manufacturers

Prof. Sham Tickoo, Purdue University Calumet

Published by CADCIM Technologies, USA
ISBN: 1-932709-21-5
Paperback, 352 Pages

Available July 17, 2006

New Material Added
Evaluation Chapters, Part Files, Student Projects
Please give us your email address and we will keep you informed about the  material added to this web page

mailto: sales@cadcim.com

Click to see Full Image

EdgeCAM 10.0 for Manufacturers introduces the reader to EdgeCAM 10.0, the world's leading manufacturing software. In this textbook, the author emphasizes on the modeling and manufacturing techniques that improve the productivity and efficiency of the user. The chapters in this book are structured in a pedagogical sequence, which makes this textbook very effective in learning the features and capabilities of the software. The following are some additional features of this book.

Covers the Part Modeler, Design Mode, Manufacture Mode, and Post Processor
Detailed explanation of
EdgeCAM 10.0 commands and tools
More than 25 real-world mechanical engineering designs as tutorials and projects with step-by-step explanation
Emphasis on Why and How with explanation
Tips and Notes throughout the textbook
352 pages with heavily illustrated text  
Self-evaluation tests and Exercises at the end of each chapter

Brief Table of Contents
Chapter 1: Introduction to EdgeCAM
Chapter 2: Drawing Sketches for Solid Models in the EdgeCAM Part Modeler
Chapter 3: Adding Constraints and Creating Procedures in the Part Modeler
Chapter 4: Creating and Editing Geometries in EdgeCAM
Chapter 5: Importing Solids and Creating Surfaces
Chapter 6: Milling Cycles
Chapter 7: Turning Cycles
Chapter 8: Machining Operations and Generating CNC Codes
Student Projects

Evaluation Chapters of EdgeCAM 10.0 for Manufacturers  textbook (zipped pdf files)
   table-of-contents-edgcam-10-eval  (30 KB),
 c03-edgcam-10-eval (675 KB),
c07-edgcam-10-eval (450 KB)
EdgeCAM Files (zipped files)
Part files used in illustrations, tutorials, and exercises

Note: These files are created in the Educational Version of the software and so cannot be opened in the Commercial Version.

  Coming Soon

If you find any problems in downloading the files or the contents, please contact us at techsupport@cadcim.com. Thank you.

Last Updated: June 17, 2006