EdgeCAM 11.0 for Manufacturers
Prof. Sham Tickoo, Purdue University Calumet, USA and CADCIM Tech.
Published by CADCIM Technologies, USA
ISBN: 978-1-932709-28-5
Paperback, 464 Pages

New Material Added
Evaluation Chapters, Part Files, Student Projects
Please give us your email address and we will keep you informed about the  material added to this web page

mailto: sales@cadcim.com


Click to see Full Image


EdgeCAM 11.0 for Manufacturers
textbook consists of 9 chapters that are pedagogically sequenced to cater to the designers and the manufacturers. Beginning with chapters that introduce the modeling concepts and their definitions, the textbook gradually progresses to cover concepts such as sketching, editing, dimensioning, and transforming the features. The textbook also explains about the machining cycles in the Manufacture mode, which increase the efficiency of the shopfloor operations. The textbook discusses in detail the tools for generating the toolpaths for various milling and turning operations, the procedure to create the CNC code files, and the simulation.


Salient Features of the Textbook:

  •   Covers the Part Modeler, Design Mode, Manufacture Mode, and Post Processor

  •   Provides a detailed  explanation of EdgeCAM 11.0 commands and tools

  •   Contains about 25 real-world mechanical engineering designs as tutorials and projects with step-by-step explanation

  •   Tips and Notes in all chapters of the textbook

  •   464 pages of heavily illustrated text 

  •   Self-Evaluation tests and Exercises at the end of each chapter

Table of Contents

    
   Chapter 1: Introduction to EdgeCAM
        Chapter 2: Drawing Sketches for Solid Models in the Part Modeler
        Chapter 3: Adding Constraints and Creating Procedures in the Part Modeler
        Chapter 4: Creating and Editing Geometries in EdgeCAM
        Chapter 5: Importing Solids and Creating Surfaces
        Chapter 6:Milling Cycles I
        Chapter 7: Milling Cycles II
        Chapter 8: Turning Cycles
        Chapter 9: Machining Operations and Post Processor
        Student Projects
        Index

Evaluation Chapters of EdgeCAM 11.0 for Manufacturers  textbook (zipped pdf files)
  Contents, Chapter3, Chapter6
Free Technical Support
For free technical support, please email to
  techsupport@cadcim.com
EdgeCAM Files (zipped files)
Part files used in illustrations, tutorials, and exercises
  c02_edgecam_11, c03_edgecam_11, c04_edgecam_11, c05_edgecam_11, c08_edgecam_11, c09_edgecam_11
Click here to order    

If you find any problems in downloading the files or the contents, please contact us at techsupport@cadcim.com. Thank you.

 Home