Autodesk Inventor 2011 for Designers
Published by CADCIM Technologies, USA
This textbook introduces the reader to
Autodesk Inventor 2011, the world's leading parametric solid modeling
software. In this textbook, the author emphasizes on the solid modeling
techniques that improve the productivity and efficiency of the user. Also,
the chapters are structured in a pedagogical sequence that makes this
textbook very effective in learning the features and capabilities of the
software. The following are some additional useful features of this book.
This textbook consists of
pedagogically sequenced chapters covering the Part, Assembly, Drafting,
Presentation, Sheet Metal, and Weldment environments of Autodesk Inventor
2011. Every chapter begins with a command section that provides a brief
information of the Autodesk Inventor tools. Every chapter provides you
with the tutorials that are created using these commands.
This approach allows the user to use this textbook initially as a learning
tool and then later use it as a reference material.
Following are the
additional features of this book:
|Evaluation Chapters of Autodesk Inventor 2010 for Designers textbook (zipped pdf files)||
c01-inv-2011.zip (437 KB)
c02-inv-2011.zip (422 KB)
c03-inv-2011.zip (302 KB)
For free technical support, please email to
|Inventor Files (zipped files)
Part, assembly, drawing, and presentation files used in illustrations and tutorials.
c04-inv-2011-prt (1,622 KB) c05-inv-2011-prt (4,838 KB)
c06-inv-2011-prt (12,650 KB) c07-inv-2011-prt (2,293 KB)
c08-inv-2011-prt (9,958 KB) c09-inv-2011-prt (3,378 KB)
c10-inv-2011-prt (7,073 KB) c11-inv-2011-prt (10,272 KB,
c12-inv-2011-prt (3,942 KB) c13-inv-2011-prt (3,617 KB)
c14-inv-2011-prt (1,305 KB) c15-inv-2011-prt (4,840 KB)
c16-inv-2011-prt (3,325 KB) c17-inv-2011-prt (413 KB)
If you find any problems in downloading the files or the contents, please contact us at firstname.lastname@example.org. Thank you.