NX 5 for Designers

Prof. Sham Tickoo, Purdue University Calumet and CADCIM Technologies, USA
Published by CADCIM Technologies, USA

ISBN: 978-1-932709-40-7
Paperback, 592 Pages

New Material Added to This Page
Evaluation Chapters and Technical Support
Please give us your email address and we will keep you informed about the  material added to this web page

mailto: sales@cadcim.com


Click to see Full Image

Description
NX 5 for Designers textbook covers the features of NX 5 and caters to both the novice and the advanced users of NX 5. Keeping in mind the requirements of the users, the textbook at first introduces sketching and part modeling in NX 5, and then gradually progresses to cover assembly and drafting. Written with the tutorial point of view and the learn-by-doing theme, the textbook is ideally suited for learning at your convenience and at your pace.

The following are some additional features of this book:
·    Consists of 13 pedagogically sequenced chapters covering the Sketching, Modeling, Assembly, and Drafting
     environments of NX 5    
·    Consists of 592 pages, hundreds of illustrations, and a comprehensive coverage of NX 5 concepts and commands
·    Real-world projects and examples focusing on industry experience
·    Step-by-step examples that guide the user through the learning process  
·    An effective introduction detailing the tools and commands covered in each chapter
·    Effectively communicates the utility of NX 5 commands, toolbars, and shortcut menus

Free Teaching and Learning Resources
CADCIM Technologies provides the following free teaching and learning resources with this textbook:
·    Technical support by contacting techsupport@cadcim.com
·    Customizable PowerPoint Presentations of every chapter in the textbook
·    Part files of all tutorials and exercises in the textbook
·    Instructor’s Guide with solution to all review questions and instructions to create the models for exercises
·    Course Outline
 

Evaluation Chapters of NX 5 for Designers textbook (zipped pdf files)
  table-of-contents-nx_5-eval  (69.5 KB),
c01-nx-5-eval (625 KB),
c04-nx-5-eval (739 KB),
c08-nx-5-eval (859 KB),
c11-nx-5-eval (1.46 MB)
Free Technical Support
For free technical support, please email to
    techsupport@cadcim.com
NX 5 Files (zipped files)
Part, Assembly, and Drawing files used in illustrations and tutorials

Note: These files are created in the Educational Version of the software and therefore cannot be opened in the Commercial Version

  c02-nx-5 (155 KB),  c03-nx-5 (135 KB), 
c04-nx-5 (509 KB),  c05-nx-5 (0.97 MB),
c06-nx-5 (945 KB),  c07-nx-5 (772 KB),
c08-nx-5 (661 KB),  c09-nx-5 (662 KB),
c10-nx-5 (1.10 MB),c11-nx-5 (799 KB),
c12-nx-5 (934 KB),  c13-nx-5 (1.231 MB)
Student Projects
(zipped PDF file)
  http://www.cadcim.com/Students_Project/basic_projects.htm
http://www.cadcim.com/Students_Project/intermediate.htm
http://www.cadcim.com/Students_Project/advance_projects.htm
 

Click here to order

   
                                                                                                   

                                                                                                     Home