Pro/ENGINEER Wildfire 4.0 for Designers
Sham Tickoo, Purdue University Calumet and 
Sandeep Premdass
, CADCIM Technologies, USA
Published by CADCIM Technologies, USA

ISBN: 978-1-932709-44-5
Paperback, 800 Pages

Please give us your email address and we will keep you informed about the  material added to this web page

Click to see Full Image

Pro/ENGINEER Wildfire 4.0 for Designers is a comprehensive textbook that introduces the users to feature based 3D parametric solid modeling using the Pro/ENGINEER Wildfire 4.0 software. The textbook covers all major environments of Pro/ENGINEER Wildfire 4.0 with a thorough explanation of commands, options, and their applications to create real-world products. About 60 mechanical engineering industry examples are used as tutorials and an additional 40 as exercises to ensure that the user can relate their knowledge and understand the design techniques used in the industry to design a product. After reading the textbook, the user will be able to create solid parts, sheet metal parts, assemblies, surfaces, and drawing views with bill of materials. Also, the user will learn the editing techniques that are essential to make a successful design. In this book, the author emphasizes on the solid modeling techniques that improve the productivity and efficiency of the user. The following are some of the features of the textbook:

  • Consists of 16 chapters that are organized in a pedagogical sequence. These chapters cover the Sketching, Modeling, Assembly, Drafting, Sheetmetal, and Surface environments of Pro/ENGINEER Wildfire 4.0.
  • The first page of every chapter summarizes the topics that will be covered in it.
  • Every chapter begins with the command section that provides the detailed explanation of the Pro/ENGINEER Wildfire 4.0 commands.
  • Additional information is provided throughout the book in the form of tips and notes.
  • Self-evaluation test and review questions are provided at the end of each chapter so that the users can assess their knowledge.

Brief Table of Contents
Chapter 1: Introduction to Pro/ENGINEER Wildfire 4.0
Chapter 2: Creating Sketches in the Sketch Mode-I
Chapter 3: Creating Sketches in the Sketch Mode-II
Chapter 4: Creating Base Features
Chapter 5: Datums
Chapter 6: Options Aiding Construction of Parts-I
Chapter 7: Options Aiding Construction of Parts-II
Chapter 8: Advanced Modeling Tools-I
Chapter 9: Advanced Modeling Tools-II
Chapter 10: Advanced Modeling Tools-III
Chapter 11: Assembly Modeling
Chapter 12: Generating, Editing, and Modifying the Drawing Views
Chapter 13: Dimensioning the Drawing Views
Chapter 14: Other Drawing Options
Chapter 15: Surface Modeling
Chapter 16: Working with Sheetmetal Components

Evaluation Chapters of Pro/ENGINEER Wildfire 4.0 for Designers textbook (zipped pdf files)
These chapters are provided only for evaluation. Do not make copies.
   contents-proe-wf-4-eval (34 KB)
(343 KB),
c05-proe-wf-4-eval (924 KB), 
(967 KB),
 c12-proe-wf-4-eval (504 KB),
 c15-proe-wf-4-eval (879 KB)
Pro/E Files (zipped files)
Sketch, Part, Assembly, and Drawing files used in the illustrations and tutorials

Note: These files are created in the Educational Version of the software and therefore cannot be opened in the Commercial Version.

   c02-proe-wf-4 (177 KB),    c03-proe-wf-4 (109 KB),
 c04-proe-wf-4 (626 KB),    c05-proe-wf-4 (310 KB),
(934 KB),    c07-proe-wf-4 (1.72 MB),
 c08-proe-wf-4 (1.64 MB), 
c09-proe-wf-4 (2.1 MB),
 c10-proe-wf-4 (4.8 MB),    c11-proe-wf-4 (4.3 MB),
(1.93 MB),  c13-proe-wf-3 (225 KB),
 c14-proe-wf-4 (2.55 MB),  c15-proe-wf-4 (1.1 MB),
 c16-proe-wf-4 (1.74 MB)
Free Technical Support
For free technical support, please email to
Student Projects
Related Links
Parametric Technology Corporation
Click here to Order    

If you find any problem in downloading the files or the contents, please contact us at
Thank you.