



Hexagen - Automatic Brick Mesh Engine

Version 2015.0, 20-Feb-2014
Copyright (c) 2014, Autodesk, Inc. All rights reserved.  



PROGRAM WILL USE THE FOLLOWING FILES:

    Input:  D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02.FEM

    Output: D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02.FEM


COMMAND LINE:
    C:\Program Files\Autodesk\Simulation 2015\SOLIDX.exe -b=0 -o=1 -zw=1 D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02 -ds=1 -u=13 -c=2 -t=1 -progress_pipe=3 -cancel_pipe=4 -za=0 -zg=1:7 -m=3 -Td=1 -Tl=15.3413 -Tg=1.2 -Tq=100 -L 


TYPE OF OPERATION:  

    Meshing only surface defined by part 3

    Generating bricks, wedges, pyramids and tetrahedra elements

    Automatically minimizing aspect ratio of solid elements





FINAL STATISTICS:

    Surface mesh contains: 1741 nodes; 5229 lines; 3486 triangles
    Number of restarts:   0
    Elapsed time: 0 minutes 1 seconds







Hexagen - Automatic Brick Mesh Engine


Version 2015.0, 20-Feb-2014

Copyright (c) 2014, Autodesk, Inc. All rights reserved.  





PROGRAM WILL USE THE FOLLOWING FILES:


    Input:  D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02.FEM


    Output: D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02.FEM




COMMAND LINE:

    C:\Program Files\Autodesk\Simulation 2015\SOLIDX.exe -b=0 -o=1 -zw=1 D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02 -ds=1 -u=13 -c=2 -t=1 -progress_pipe=7 -cancel_pipe=8 -za=0 -zg=1:7 -m=1 -Td=1 -Tl=8 -Tg=1.2 -Tq=100 -L 




TYPE OF OPERATION:  


    Meshing only surface defined by part 1


    Generating bricks, wedges, pyramids and tetrahedra elements


    Automatically minimizing aspect ratio of solid elements








FINAL STATISTICS:


    Surface mesh contains: 1184 nodes; 3558 lines; 2372 triangles

    Number of restarts:   0

    Elapsed time: 0 minutes 1 seconds









Hexagen - Automatic Brick Mesh Engine


Version 2015.0, 20-Feb-2014

Copyright (c) 2014, Autodesk, Inc. All rights reserved.  





PROGRAM WILL USE THE FOLLOWING FILES:


    Input:  D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02.FEM


    Output: D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02.FEM




COMMAND LINE:

    C:\Program Files\Autodesk\Simulation 2015\SOLIDX.exe -b=0 -o=1 -zw=1 D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02 -ds=1 -u=13 -c=2 -t=1 -progress_pipe=11 -cancel_pipe=12 -za=0 -zg=1:7 -m=2 -Td=1 -Tl=10.8889 -Tg=1.2 -Tq=100 -L 




TYPE OF OPERATION:  


    Meshing only surface defined by part 2


    Generating bricks, wedges, pyramids and tetrahedra elements


    Automatically minimizing aspect ratio of solid elements








FINAL STATISTICS:


    Surface mesh contains: 688 nodes; 2058 lines; 1372 triangles

    Number of restarts:   0

    Elapsed time: 0 minutes 0 seconds









Hexagen - Automatic Brick Mesh Engine


Version 2015.0, 20-Feb-2014

Copyright (c) 2014, Autodesk, Inc. All rights reserved.  





PROGRAM WILL USE THE FOLLOWING FILES:


    Input:  D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02.FEM


    Output: D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02.FEM




COMMAND LINE:

    C:\Program Files\Autodesk\Simulation 2015\SOLIDX.exe -b=0 -o=1 -zw=1 D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02 -ds=1 -u=13 -c=2 -t=1 -progress_pipe=15 -cancel_pipe=16 -za=0 -zg=1:7 -m=6 -Td=1 -Tl=9.05991 -Tg=1.2 -Tq=100 -L 




TYPE OF OPERATION:  


    Meshing only surface defined by part 6


    Generating bricks, wedges, pyramids and tetrahedra elements


    Automatically minimizing aspect ratio of solid elements








FINAL STATISTICS:


    Surface mesh contains: 602 nodes; 1830 lines; 1220 triangles

    Number of restarts:   0

    Elapsed time: 0 minutes 0 seconds









Hexagen - Automatic Brick Mesh Engine


Version 2015.0, 20-Feb-2014

Copyright (c) 2014, Autodesk, Inc. All rights reserved.  





PROGRAM WILL USE THE FOLLOWING FILES:


    Input:  D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02.FEM


    Output: D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02.FEM




COMMAND LINE:

    C:\Program Files\Autodesk\Simulation 2015\SOLIDX.exe -b=0 -o=1 -zw=1 D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02 -ds=1 -u=13 -c=2 -t=1 -progress_pipe=19 -cancel_pipe=20 -za=0 -zg=1:7 -m=7 -Td=1 -Tl=9.05991 -Tg=1.2 -Tq=100 -L 




TYPE OF OPERATION:  


    Meshing only surface defined by part 7


    Generating bricks, wedges, pyramids and tetrahedra elements


    Automatically minimizing aspect ratio of solid elements








FINAL STATISTICS:


    Surface mesh contains: 597 nodes; 1815 lines; 1210 triangles

    Number of restarts:   0

    Elapsed time: 0 minutes 0 seconds









Hexagen - Automatic Brick Mesh Engine


Version 2015.0, 20-Feb-2014

Copyright (c) 2014, Autodesk, Inc. All rights reserved.  





PROGRAM WILL USE THE FOLLOWING FILES:


    Input:  D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02.FEM


    Output: D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02.FEM




COMMAND LINE:

    C:\Program Files\Autodesk\Simulation 2015\SOLIDX.exe -b=0 -o=1 -zw=1 D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02 -ds=1 -u=13 -c=2 -t=1 -progress_pipe=23 -cancel_pipe=24 -za=0 -zg=1:7 -m=5 -Td=1 -Tl=8.09228 -Tg=1.2 -Tq=100 -L 




TYPE OF OPERATION:  


    Meshing only surface defined by part 5


    Generating bricks, wedges, pyramids and tetrahedra elements


    Automatically minimizing aspect ratio of solid elements








FINAL STATISTICS:


    Surface mesh contains: 391 nodes; 1191 lines; 794 triangles

    Number of restarts:   0

    Elapsed time: 0 minutes 0 seconds









Hexagen - Automatic Brick Mesh Engine


Version 2015.0, 20-Feb-2014

Copyright (c) 2014, Autodesk, Inc. All rights reserved.  





PROGRAM WILL USE THE FOLLOWING FILES:


    Input:  D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02.FEM


    Output: D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02.FEM




COMMAND LINE:

    C:\Program Files\Autodesk\Simulation 2015\SOLIDX.exe -b=0 -o=1 -zw=1 D:\Autodesk Simulation Manuscript\Autodesk Simulation Manuscript 2015\Autodesk Simulation _Tut and Exe_Final - Used\Input File\c07_simulation_2014_input\Tut02\c07_tut02 -ds=1 -u=13 -c=2 -t=1 -progress_pipe=27 -cancel_pipe=28 -za=0 -zg=1:7 -m=4 -Td=1 -Tl=8.09228 -Tg=1.2 -Tq=100 -L 




TYPE OF OPERATION:  


    Meshing only surface defined by part 4


    Generating bricks, wedges, pyramids and tetrahedra elements


    Automatically minimizing aspect ratio of solid elements








FINAL STATISTICS:


    Surface mesh contains: 389 nodes; 1185 lines; 790 triangles

    Number of restarts:   0

    Elapsed time: 0 minutes 1 seconds



